Constant temperature and humidity test chamber is mainly used to test the performance of materials in various environments and to test the heat resistance, cold resistance, dryness resistance and moisture resistance of various materials.

To make the constant temperature and humidity incubator more durable, the following daily maintenance should be done:

1. Keep clean: The body of the constant temperature and humidity chamber should be kept clean at all times to prevent a large amount of dust from being sucked into the unit to cause accidents and reduce performance.

2. Humidifier barrel: In order to ensure the clarity of the water quality and prevent the scale inside from affecting the water flow, the water in the humidifier barrel should be replaced once a month.

3. Water storage cylinder: Too high or too low water level in the water storage cylinder will affect the test performance of the constant temperature and humidity chamber, so the water level should be kept at about 60%.

4. Gauze: It is recommended to replace the gauze once a month, and wipe the temperature measuring part of the constant temperature and humidity chamber with a cleaning cloth.

5. Condenser: The constant temperature and humidity chamber will cause a lot of dust to adhere to the condenser when working for a long time, resulting in reduced heat dissipation effect, so it is necessary to use a vacuum cleaner to blow away the dust.

6. High current contacts of the distribution board: The distribution room should be cleaned and inspected at least once a year. Loose contacts will put the entire equipment in a dangerous working state, so please use a vacuum cleaner to remove the dust.

7. Refrigeration system: The refrigeration system should be inspected once a year, including all copper pipes, speaker joints, welding joints, etc.