When the constant temperature and humidity incubator is working, the signals measured by the temperature and humidity sensors are transmitted to the temperature control instrument, and the CPU in the temperature control instrument makes a correct judgment, outputs heating or cooling signals and humidification or dehumidification signals, and controls heating tube or compressor and humidifier work. The control method is adaptive control, with high temperature control accuracy, small fluctuation of temperature and humidity, and uniform temperature.

In order to ensure the service life of the constant temperature and humidity chamber, it is recommended that the equipment should be placed in an environment of 25±10°C, because R23 refrigerant is a compressible gas, which will change with ambient temperature. If the ambient temperature is low, it will be low, otherwise, if the ambient temperature is high, it will be high. During working, it is normal if the pressure indication is around 170-290psi. If the pressure exceeds 300psi, it means that the ambient temperature is too high, or the heat dissipation performance of the equipment is not good. The high pressure equipment will cause overpressure, resulting in an alarm, and the constant temperature and humidity test chamber will stop working, which will not only affect your test results but also cause damage to the equipment.

The lab constant temperature and humidity incubator has a dual adjustment system of temperature and humidity, which can control the temperature and humidity in the incubator. It is an indispensable laboratory equipment for scientific research and education departments of plants, biology, genetics, medicine, environmental protection, etc., and is widely used in low temperature and constant temperature experiments, cultivation experiments, environmental experiments, etc.